Chirp-Zone

Security without barriers



What is Chirp-Zone?

 

If your store doesn’t have walls then there is no EAS system on the market that will work, until now. Chirp-Zone creates a wireless zone which will confine that tags to an agreed area. If the tag is taken out of range of the hub then the alarm within the tag is triggered. However if the tag is returned within range of the hub then the alarm stops. 

The range of the hub is 5m radius but simply add more hubs to the system to expand the range covered. Each hub will support an unlimited number of tags and you can have an unlimited amount of hubs.

Chirp-Zone is a true plug and play security system which only required mains 220/240v power to operate. This makes it ideal for Concessions stores, trade shows, kiosks, and even outside events. It is also just as effective in standard stores too.


What would my setup look like?

 

Because it works on proximity, Chirp-Zone can be set up any time, any place in seconds. It's ideal for a shop without walls where you want to keep your products within a certain range. Customers of this system include kiosks, department stores and outdoor stalls. Chirp-Zone is perfect for any environment where physical gates aren't practical to use and some customers in fact like to use Chirp-Zone in addition to conventional EAS systems, in order to keep products within a specific area.



Watch the Video



The Benefits of Chirp-Zone


No Gates 150

No Gates

Traditional EAS systems require permanently fixed gates floor mounted at every exit but Chirp-Edge is a breeze to install and can be ceiling-mounted out of sight.
Plug and Play 150

Plug and Play

Chirp is a breeze to set up and the only wire required is the cable to power the Hub. And because it works on proximity, you can set up Chirp-Zone anywhere - including outdoors!
Modular 150

Modular System

You can daisy-chain multiple hubs together to easily create a larger zone or a series of zones.
Can’t be jammed 150

Can't be Jammed!

The hub's constant contact with each tag means the tag will alarm if communication is stopped!


The 3 Key Components


The Hub

The Hub is the heartbeat of the system, using RF to communicate with each of the tags in your setup.

It casts a wireless zone up to 5 metres in diameter and you can use multiple hubs together to extend the range by creating a web.

You can set it up in minutes any time, any place.

The Hub measures approx. 14cm x 14cm.


The Tags

Our main tag is a Lanyard style which loops around the product you wish to protect. We offer varying lengths of cables as optional accessories and we are developing new tag varieties. We also supply a Surface tag which you stick to a product, engaging a pressure switch.

With the Chirp-Zone system, if a Tag is taken too far away from the Hub then an alarm will sound in the Tag until it is returned to the zone or it's deactivated using the Remote.


The Control System

There are two parts to the control system - the Remote and the Remote Resetter.

The Remote activates and deactivate each tag. It only stays active for 24 hours before needing reactivating to combat loss/theft.

The Remote Resetter is used to reactivate each remote control at the start of each day.


The Starter Pack



To get you started we've created a Starter Pack that contains all you need to get set up and begin protecting a minimum of 25 products.

The Starter Pack contains:

  • 1x Chirp-Zone Hub

  • 25x Lanyard Tags

  • 1x Remote Control and 1x Resetter

If you need to protect more products or a larger area than 5 metres diameter then please contact us to discuss your requirements.